Datasheet for ADVFC32BH:
- Manufacturer Part Number : ADVFC32BH
- Manufacturer : AD
- Description : Low Cost Monolithic Voltage-to-Frequency (V/F) Converter IC
- Series : ADVFC32
- Reference Price : USD 8.848
- Our Price : We have a better price, contact us by email
- Product Type : Integrated/Special Purpose A/D Converters
- Function : Voltage to Frequency Converters
- Current Suggest : Not Recommended for New Designs
- Status : Production
- ROHS Status : NON-ROHS Leaded
- Package Type : 10-Lead TO-100
- Pins : 10
- MFG Package Case : H-10-1
- Part Type : OTH
- Standard Packing Type : Tube
- Standard Packing Quantity : 100
- Working Temperature : -25 to 85C
- Other Part Number : ADVFC32BH
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for ADVFC32BH. If you need any more information about ADVFC32BH, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- High Linearity
±0.01%Max at 10 kHz FS
±0.05%Max at 100 kHz FS
±0.2%Max at 500 kHz FS - Output TTL/CMOS-Compatible
- V/F or F/V Conversion
- 6 Decade Dynamic Range
- Voltage or Current Input
- Reliable Monolithic Construction
- MIL-STD-883-Compliant Versions Available
TTL or CMOS compatibility is achieved in the V/F operating mode using an open collector frequency output. The pullup resistor can be connected to voltages up to 30 volts, or to +15 V or +5 V for conventional CMOS or TTL logic levels. This resistor should be chosen to limit current through the open collector output to 8 mA. A larger resistance can be used if driving a high impedance load.
Input offset drift is only 3ppm of full scale per °C, and full-scale calibration drift is held to a maximum of 100 ppm/°C (ADVFC32BH) due to a low T.C. Zener diode.
The ADVFC32 is available in commercial, industrial, and extended temperature grades. The commercial grade is packaged in a 14-pin plastic DIP while the two wider temperature range parts are packaged in hermetically sealed TO-100 cans.
This designates products ADI does not recommend broadly for new designs.