Datasheet for ADVFC32SH/883B:
- Manufacturer Part Number : ADVFC32SH/883B
- Manufacturer : AD
- Description : Low Cost Monolithic Voltage-to-Frequency (V/F) Converter IC
- Series : ADVFC32
- Reference Price : USD 27.328
- Our Price : We have a better price, contact us by email
- Product Type : Integrated/Special Purpose A/D Converters
- Function : Voltage to Frequency Converters
- Current Suggest : Not Recommended for New Designs
- Status : Production
- ROHS Status : NON-ROHS Leaded
- Package Type : 10-Lead TO-100
- Pins : 10
- MFG Package Case : H-10-1
- Part Type : OTH
- Standard Packing Type : Tube
- Standard Packing Quantity : 100
- Working Temperature : -55 to 125C
- Other Part Number : ADVFC32SH/883B
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for ADVFC32SH/883B. If you need any more information about ADVFC32SH/883B, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- High Linearity
±0.01%Max at 10 kHz FS
±0.05%Max at 100 kHz FS
±0.2%Max at 500 kHz FS - Output TTL/CMOS-Compatible
- V/F or F/V Conversion
- 6 Decade Dynamic Range
- Voltage or Current Input
- Reliable Monolithic Construction
- MIL-STD-883-Compliant Versions Available
TTL or CMOS compatibility is achieved in the V/F operating mode using an open collector frequency output. The pullup resistor can be connected to voltages up to 30 volts, or to +15 V or +5 V for conventional CMOS or TTL logic levels. This resistor should be chosen to limit current through the open collector output to 8 mA. A larger resistance can be used if driving a high impedance load.
Input offset drift is only 3ppm of full scale per °C, and full-scale calibration drift is held to a maximum of 100 ppm/°C (ADVFC32BH) due to a low T.C. Zener diode.
The ADVFC32 is available in commercial, industrial, and extended temperature grades. The commercial grade is packaged in a 14-pin plastic DIP while the two wider temperature range parts are packaged in hermetically sealed TO-100 cans.
This designates products ADI does not recommend broadly for new designs.