Datasheet for AD5748ACPZ:
- Manufacturer Part Number : AD5748ACPZ
- Manufacturer : AD
- Description : Industrial Current/Voltage Output Driver with Programmable Ranges IC
- Series : AD5748
- Reference Price : USD 1.72
- Our Price : We have a better price, contact us by email
- Product Type : Specialty Amplifiers
- Function : Industrial 4-20mA Driver
- Current Suggest : Recommended for New Designs
- Status : Production
- ROHS Status : ROHS Compliant (Lead Free)
- Package Type : 32-Lead LFCSP (5mm x 5mm w/ EP)
- Pins : 32
- MFG Package Case : CP-32-7
- Part Type : OTH
- Standard Packing Type : Tray
- Standard Packing Quantity : 490
- Working Temperature : -40 to 105C
- Other Part Number : AD5748ACPZ
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for AD5748ACPZ. If you need any more information about AD5748ACPZ, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- Current output ranges:
4 mA to 21 mA, 0 mA to 21 mA
±0.15% FSR total unadjusted error (TUE)
±5 ppm/°C FSR typical output drift - Voltage output ranges: 0 V to 5 V,
0 V to 10.5 V, ±10.5 V
±0.05% FSR total unadjusted error (TUE)
±3 ppm/°C FSR output drift - Flexible serial digital interface
- On-chip output fault detection
- PEC error checking
- Asynchronous CLEAR function
- Flexible power-up condition to 0 V or tristate
- Power supply range
AVDD: +12 V (± 10%) to +24 V (± 10%)
AVSS: −12 V (± 10%) to −24 V (± 10%) - Output loop compliance to
AVDD − 2.75 V - Temperature range: −40°C to +105°C
- 32-lead, 5 mm × 5 mm LFCSP package
The output current range is programmable across two current ranges: 4 mA to 21 mA and 0 mA to 21 mA.
Voltage output is provided from a separate pin that can be configured to provide 0 V to 5 V, 0 V to 10.5 V, or ±10.5 V output range.
Analog outputs are short-circuit and open-circuit protected and can drive capacitive loads of 2 μF and inductive loads of 0.1 H.
The device is specified to operate with a power supply range from ±12 V to ±24 V. Output loop compliance is 0 V to AVDD − 2.75 V.
The flexible serial interface is SPI- and MICROWIRE-compatible and can be operated in 3-wire mode to minimize the digital isolation required in isolated applications. The interface also features an optional PEC error checking feature using CRC-8 error checking, useful in industrial environments where data communication corruption can occur.
The device also includes a power-on-reset function, ensuring that the device powers up in a known state (0 V or tristate), and a asynchronous CLEAR pin that sets the outputs to zero scale/midscale voltage output or the low end of the selected current range.
An HW SELECT pin is used to configure the part for hardware or software mode on power-up.
Note that the plots in the Typical Performance Characteristics section of this data sheet contain information on the standard ranges, as released in the AD5750/AD5750-1 data sheet. Although the overranges have been tested, new plots were not generated and substitution data was used for plotting purposes.
Applications
- Process control
- Actuator control
- PLCs
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
