Datasheet for AD2427WCCSZ01:
- Manufacturer Part Number : AD2427WCCSZ01
- Manufacturer : AD
- Description : A2B mid-line slave 4xPDM XCVR IC
- Series : AD2427W
- Reference Price : USD 2.688
- Our Price : We have a better price, contact us by email
- Product Type : Automotive Audio Bus®
- Function : -
- Current Suggest : Recommended for New Designs
- Status : Production
- ROHS Status : ROHS Compliant (Lead Free)
- Package Type : 32-Lead LFCSP (5mm x 5mm x 0.75mm w/ EP)
- Pins : 32
- MFG Package Case : CS-32-2
- Part Type : OTH
- Standard Packing Type : Tray
- Standard Packing Quantity : 490
- Working Temperature : -40 to 105C
- Other Part Number : AD2427WCCSZ01
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for AD2427WCCSZ01. If you need any more information about AD2427WCCSZ01, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- Line topology
- Single master, multiple slave
- Up to 15 m between nodes and up to 40m overall cable length
- Communication over distance
- Synchronous data
- Multichannel I2S/TDM to I2S/TDM
- Synchronous clock, phase aligned in all nodes
- Low latency slave to slave communication
- Control and status information I2C to I2C
- GPIO and interrupt
- Synchronous data
- Bus power or local power slave nodes
- Configurable with SigmaStudio graphical software tool
- AEC-Q100 qualified for automotive applications
- Configurable A2B bus master or slave operation
- I2C interface
- 8-bit to 32-bit multichannel I2S/TDM interface
- Programmable I2S/TDM data rate
- Up to 32 upstream and 32 downstream channels
- PDM interface
- Programmable PDM clock rate
- Up to 4 high dynamic range microphone inputs
- Simultaneous reception of I2S data with up to 4 PDM microphones
- Unique ID register for each transceiver
- Crossover or straight-through cabling
- Programmable settings to optimize EMC performance
The Automotive Audio Bus (A2B®) provides a multichannel, I2S/TDM link over distances of up to 15 m between nodes. It embeds bidirectional synchronous pulse-code modulation (PCM) data (for example, digital audio), clock, and synchronization signals onto a single differential wire pair. A2B supports a direct point to point connection and allows multiple, daisy-chained nodes at different locations to contribute and/or consume time division multiplexed (TDM) channel content.
A2B is a single-master, multiple-slave system where the transceiver at the host controller is the master. The master generates clock, synchronization, and framing for all slave nodes. The master A2B transceiver is programmable over a control port (I2C) for configuration and read back. An extension of this control port is embedded in the A2B data stream, which grants direct access of registers and status information on slave transceivers as well as I2C to I2C communication over distance.
The transceiver can connect directly to general-purpose digital signal processors (DSPs), field-programmable gate arrays (FPGAs), application specific integrated circuits (ASICs), microphones, analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and codecs through a multichannel I2S/TDM interface. It also provides a pulse density modulation (PDM) interface for direct connection of up to four PDM digital microphones.
Finally, the transceiver also supports an A2B bus powering feature, where the master node supplies voltage and current to the slave nodes over the same daisy-chained, twisted pair wire cable as used for the communication link.
| Feature | AD2420/ AD2420W | AD2426/ AD2426W | AD2427/ AD2427W | AD2428/ AD2428W | AD2429/ AD2429W |
| Master capable | No | No | No | Yes | Yes |
| Number of slaves discoverable1 | N/A | N/A | N/A | Up to 10 | Up to 2 |
| Functional TRX blocks | A only | A only | A + B | A + B | B only |
| I2S/TDM support | No | No | No | Yes | Yes |
| PDM microphone inputs | 2 mics2 | 4 mics | 4 mics | 4 mics | 4 mics |
| Max node to node cable length | 5 m | 15 m | 15 m | 15 m | 5 m |
1 N/A means not applicable.
2 PDM microphones must be connected to the DRX0/IO5 pin.
Applications
- Audio communication link
- Microphone arrays
- Beamforming
- Hands free and in car communication
- Active and road noise cancellation
- Audio/video conferencing systems
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.