Datasheet for AD5930YRUZ-REEL7:
- Manufacturer Part Number : AD5930YRUZ-REEL7
- Manufacturer : AD
- Description : Programmable Frequency Sweep and Output Burst Waveform Generator IC
- Series : AD5930
- Reference Price : USD 5.256
- Our Price : We have a better price, contact us by email
- Product Type : Direct Digital Synthesis
- Function : -
- Current Suggest : Production
- Status : Production
- ROHS Status : ROHS Compliant (Lead Free)
- Package Type : 20-Lead TSSOP
- Pins : 20
- MFG Package Case : RU-20
- Part Type : REEL
- Standard Packing Type : Reel
- Standard Packing Quantity : 1000
- Working Temperature : -40 to 125C
- Other Part Number : AD5930YRUZ-REEL7
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for AD5930YRUZ-REEL7. If you need any more information about AD5930YRUZ-REEL7, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
The AD5930 is a waveform generator with programmable frequency sweep and output burst capability. Utilizing embedded digital processing that allows enhanced frequency control, the device generates synthesized analog or digital frequency-stepped waveforms. Because frequency profiles are preprogrammed, continuous write cycles are eliminated and thereby free up valuable DSP/microcontroller resources. Waveforms start from a known phase and are incremented phase continuously, which allows phase shifts to be easily determined. Consuming only 8 mA, the AD5930 provides a convenient low power solution to waveform generation.
The AD5930 can be operated in a variety of modes. In continuous output mode, the device outputs the required frequency for a defined length of time and then steps to the next frequency. The length of time the device outputs a particular frequency is either preprogrammed and the device increments the frequency automatically, or, alternatively, is incremented externally via the CTRL pin. In burst mode, the device outputs its frequency for a length of time and then returns to midscale for a further predefined length of time before stepping to the next frequency. When the MSBOUT pin is enabled, a digital output is generated.
To program the device, the user enters the start frequency, the increment step size, the number of increments to be made, and the time interval that the part outputs each frequency. The frequency sweep profile is initiated, started, and executed by toggling the CTRL pin.
A number of different sweep profiles are offered. Frequencies can be stepped in triangular-sweep mode, which continuously sweeps up and down through the frequency range. Alternatively, in saw-sweep mode, the frequency is swept up through the frequency range, but returns to the initial frequency before executing the sweep again. In addition, a single frequency or burst can be generated without any sweep.
The AD5930 is written to via a 3-wire serial interface, which operates at clock rates up to 40 MHz. The device operates with a power supply from 2.3 V to 5.5 V. Note that AVDD and DVDD are independent of each other and can be operated from different voltages. The AD5930 also has a standby function, which allows sections of the device that are not being used to be powered down.
The AD5930 is available in a 20-lead pb-free TSSOP package.
Applications
- Frequency sweeping/radar
- Network/impedance measurements
- Incremental frequency stimulus
- Sensory applications
- Proximity and motion
- BFSK
- Frequency bursting/pulse trains
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
