The AD5689/AD5687 members of the nanoDAC+™ family arelow power, dual, 16-/12-bit, buffered voltage output digital-to-analogconverters (DACs). The devices include a gain select pingiving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). TheAD5689/AD5687 operate from a single 2.7 V to 5.5 V supply, areguaranteed monotonic by design, and exhibit less than 0.1% FSRgain error and 1.5 mV offset error performance. Both devices areavailable in a 3 mm × 3 mm LFCSP and a TSSOP package.

The AD5689/AD5687 also incorporate a power-on reset circuitand a RSTSEL pin that ensures that the DAC outputs power upto zero scale or midscale and remain there until a valid writetakes place. Each part contains a per channel power-down featurethat reduces the current consumption of the device to 4 µA at3 V while in power-down mode.

The AD5689/AD5687 uses a versatile serial peripheral interfacethat operates at clock rates up to 50 MHz. Both devices containa V_LOGIC pin that is intended for 1.8 V/3 V/5 V logic.

Product Highlights

1. High Relative Accuracy (INL).
   AD5689 (16-bit): ±2 LSB maximum
2. Excellent DC Performance.
   Total unadjusted error: ±0.1% of FSR maximum
   Offset error: ±1.5 mV maximum
   Gain error: ±0.1% of FSR maximum
3. Two Package Options.
   3 mm × 3 mm, 16-lead LFCSP or 16-lead TSSOP

Applications

• Optical transceivers
• Base station power amplifiers
• Process control (PLC I/O cards)
• Industrial automation
• Data acquisition systems

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.