Datasheet for AD7280AWBSTZ:
- Manufacturer Part Number : AD7280AWBSTZ
- Manufacturer : AD
- Description : Lithium Ion Battery Monitoring System IC
- Series : AD7280A
- Reference Price : USD 3.464
- Our Price : We have a better price, contact us by email
- Product Type : Battery Management
- Function : Multicell Battery Stack Monitor
- Current Suggest : Recommended for New Designs
- Status : Production
- ROHS Status : ROHS Compliant (Lead Free)
- Package Type : 48-Lead LQFP (7mm x 7mm)
- Pins : 48
- MFG Package Case : ST-48
- Part Type : OTH
- Standard Packing Type : Tray
- Standard Packing Quantity : 250
- Working Temperature : -40 to 105C
- Other Part Number : AD7280AWBSTZ
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for AD7280AWBSTZ. If you need any more information about AD7280AWBSTZ, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- 12-bit ADC, 1 μs per channel conversion time
- 6 analog input channels,
- CM range 0.5 V to 27.5 V
- 6 auxiliary ADC Inputs
- ±1.6 mV cell voltage accuracy
- On-chip voltage regulator
- Cell balancing interface
- Daisy-chain interface
- Internal reference: ±3 ppm/°C
- 1.8 μA power-down current
- High input impedance
- Serial interface with alert function
- See data sheet for additional features
The AD7280A contains all the functions required for general-purpose monitoring of stacked lithium ion batteries as used in hybrid electric vehicles, battery backup applications, and power tools. The part has multiplexed cell voltage and auxiliary ADC measurement channels for up to six cells of battery management. An internal ±3 ppm reference is provided that allows a cell voltage accuracy of ±1.6 mV. The ADC resolution is 12 bits and allows conversion of up to 48 cells within 7 μs.
The AD7280A operates from just one VDD supply that has a range of 8 V to 30 V (with an absolute maximum rating of 33 V). The part provides six differential analog input channels to accommodate large common-mode signals across the full VDD range. Each channel allows an input signal range, VIN(+) − VIN(−), of 1 V to 5 V. The input pins assume a series stack of six cells. In addition, the part includes six auxiliary ADC input channels that can be used for temperature measurement or system diagnostics.
The AD7280A includes on-chip registers that allow a sequence of channel measurements to be programmed to suit the applications requirements.
The AD7280A also includes a dynamic alert function that can detect if the cell voltages or auxiliary ADC inputs exceed an upper or lower limit defined by the user. The AD7280A has cell balancing interface outputs designed to control external FET transistors to allow discharging of individual cells.
The AD7280A includes a built in self-test feature that internally applies a known voltage to the ADC inputs.
There is a daisy-chain interface that allows up to eight parts to be stacked without the need for individual device isolation.
The AD7280A requires only one supply pin that takes 6.5 mA under normal operation, while converting at 1 MSPS.
All this functionality is provided in a 48-lead LQFP package operating over a temperature range of −40°C to +105°C.
Applications
- Lithium ion battery monitoring
- Electric and hybrid electric vehicles
- Power supply back up
- Power tools
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
