Datasheet for ADP5062:
- Manufacturer Part Number : ADP5062
- Manufacturer : AD
- Description : Linear Li-Ion Battery Charger with Power Path and USB Compatibility in LFCSP
- Series : ADP5062
- Reference Price : USD 1.032
- Our Price : We have a better price, contact us by email
- Product Type : Battery Management
- Function : Battery Charger IC
- Current Suggest : Production
- Status : Production
- RoHS Status: -
- Voltage: -
- Feature: -
- Package Case: -
- Temperature Range: -
- Packing: Reel/Tray/Tube
- Standard Packing Quantity: -
- Country of Origin: -
- Other Part Number : ADP5062
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for ADP5062. If you need any more information about ADP5062, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- 4mm x 4mm LFCSP Package
- Fully programmable via I2C
- Flexible digital control inputs
- Up to 2.1 A current from an ac charger while in LDO mode
- Operating input voltage from 4.0V up to 7.0V
- Tolerant input voltage -0.5V to 20V (USB VBUS)
- Fully compatible with USB 3.0 and USB battery charging specification 1.2
- Built-in current sensing and limiting
- Down to 54 mΩ battery isolation FET between battery and charger output
- Thermal regulation prevents over heating
- Compliant with JEITA 1 and JEITA 2 Li-Ion battery charging temperature specifications
- SYS_EN flag permits the system to be disabled until battery is at minimum required level for guaranteed system start-up
The ADP5062 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V thereby alleviating concerns about USB bus spikes during disconnect or connect scenarios.
The ADP5062 features an internal FET between the linear charger output and the battery. This permits battery isolation and, hence, system powering under a dead battery or no battery scenario, which allows for immediate system function on connec-tion to a USB power supply.
Based on the type of USB source, which is detected by an external USB detection chip, the ADP5062 can be set to apply the correct current limit for optimal charging and USB compliance.
The ADP5062 has three factory-programmable digital input/out-put pins that provide maximum flexibility for different systems. These digital input/output pins permit combinations of features such as, input current limits, charging enable and disable, charging current limits, and a dedicated interrupt output pin.
APPLICATIONS- Digital Still Cameras
- Digital Video Cameras
- Single Cell Li-Ion Portable Equipment
- PDAs, Audio and GPS Devices
- Portable Medical Devices
- Mobile Phones
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.