Datasheet for ADM1172-1AUJZ-RL7:
- Manufacturer Part Number : ADM1172-1AUJZ-RL7
- Manufacturer : AD
- Description : 2.7 V to 16.5 V Hot Swap Controller with Power-Fail Comparator IC
- Series : ADM1172
- Reference Price : USD 1.664
- Our Price : We have a better price, contact us by email
- Product Type : Hot Swap Controllers
- Function : Low Voltage Hot Swap Controllers
- Current Suggest : Production
- Status : Production
- ROHS Status : ROHS Compliant (Lead Free)
- Package Type : 8-Lead TSOT
- Pins : 8
- MFG Package Case : UJ-8
- Part Type : REEL
- Standard Packing Type : Reel
- Standard Packing Quantity : 3000
- Working Temperature : -40 to 85C
- Other Part Number : ADM1172-1AUJZ-RL7
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for ADM1172-1AUJZ-RL7. If you need any more information about ADM1172-1AUJZ-RL7, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- Controls supply rails from 2.7 V to 16.5 V
- Allows protected board removal and insertion to a live backplane
- External sense resistor provides adjustable analog current limit with circuit breaker
- Peak fault current limited with fast response
- Charge pumped gate drive for external N-FET switch
- Power-fail comparator
- Automatic retry or latch-off during current fault
- Undervoltage lockout
- 8-lead, TSOT package
The ADM1172 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An internal charge pump is used to enhance the gate of the N-channel FET. When an overcurrent condition is detected, the gate voltage of the FET is reduced to limit the current flowing through the sense resistor. During an overcurrent condition, the TIMER pin capacitor determines the amount of time the FET remains at a current limiting mode of operation until it is shut down. The ON (ON-CLR) pin is the enable input for the device and can be used to monitor the input supply voltage. The ADM1172 operates with a supply voltage ranging from 2.7 V to 16.5 V.
The ADM1172 also features a power-fail comparator. The voltage on the PFI pin is compared with an internal 0.6 V reference, and the output of this comparator is presented on the PFO pin. This device is available in two options: the ADM1172-1 with automatic retry for overcurrent fault and the ADM1172-2 with latch-off for an overcurrent fault. Toggling the ON (ON-CLR) pin resets a latched fault. The ADM1172 is packaged in an 8-lead TSOT.
Applications
- Hot swap board insertion: line cards, raid systems
- Industrial high-side switches/circuit breakers
- Electronic circuit breakers
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
