Datasheet for ADMV4530IF-EVALZ:
- Manufacturer Part Number : ADMV4530IF-EVALZ
- Manufacturer : AD
- Description : Dual-mode, Ka Band Upconverter withIntegrated Fractional-N PLL and VCO IC
- Series : ADMV4530
- Reference Price : USD 0
- Our Price : We have a better price, contact us by email
- Product Type : RF Integrated Transmitters, Receivers, & Transceivers
- Function : Microwave and mmWave Tx/Rx
- Current Suggest : Recommended for New Designs
- Status : Production
- ROHS Status : ROHS Compliant (Lead Free)
- Package Type : IF Evaluation Board
- Pins : -
- MFG Package Case : -
- Part Type : EVAL
- Standard Packing Type : -
- Standard Packing Quantity : -
- Working Temperature : -
- Other Part Number : ADMV4530IF-EVALZ
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for ADMV4530IF-EVALZ. If you need any more information about ADMV4530IF-EVALZ, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- RF output frequency range: 27 GHz to 31 GHz
- Two upconversion modes
- Direct upconversion from differential baseband I/Q (I/Q mode)
- Single upper sideband upconversion (IF mode)
- 1 dB bandwidth: 500 MHz (I/Q mode)
- Input frequency range: 2 GHz to 3 GHz (IF mode)
- Matched, 50 Ω, single-ended RF output
- Matched, 50 Ω, single-ended IF input
- Programmable baseband I/Q common mode-voltage
- Sideband rejection and carrier feedthrough optimization
- Combined RF and IF gain dynamic range: 70 dB
- Programmable automatic IF gain control
- Programmable via 3-wire or 4-wire SPI
- 40-terminal, 6 mm × 6 mm, RoHS compliant LGA
The ADMV4530 is a highly integrated upconverter with an inphase/quadrature (I/Q) mixer that is ideally suited for next generation Ka band satellite communications.
An integrated low phase noise, fractional-N phase-locked loop (PLL) with a voltage controlled oscillator (VCO) and internal 2× multiplier generate the necessary on-chip local oscillator (LO) signal for the I/Q mixer, eliminating the need for external frequency synthesis. The VCO uses an internal autocalibration routine that allows the PLL to select the necessary settings and locks in approximately 100 µs.
The single-ended reference input to the PLL operates up to 500 MHz and features internal reference dividers and a multiplier for added flexibility. Additionally, the phase frequency detector (PFD) comparison frequency can be up to 250 MHz for integer mode and 160 MHz for fraction-N mode.
The upconverter consists of an I/Q mixer that can operate in either I/Q mode with 500 MHz of bandwidth or in IF mode up to 3 GHz of bandwidth, which allows various radio architectures and backward compatibility with legacy systems.
Immediately following the I/Q mixer are stages of gain and variable attenuation. The configuration can achieve a minimum 1 dB compression point (P1dB) compression point of 19 dBm, eliminating the need for external stages of gain.
A programmable 4-wire serial port interface (SPI) allows adjustment of the quadrature phase for optimum sideband suppression. In addition, the SPI allows nulling of LO feedthrough in IF mode. In I/Q mode, the LO feedthrough can be nulled by applying external dc offset to the differential baseband I/Q inputs.
An IF automatic gain control (AGC) adjusts the IF variable gain amplifier (VGA) to compensate for input power variations. During normal operation, this AGC feature can be enabled or disabled via the SPI. When disabled during normal operation, the AGC feature only works on a test tone during power-down mode to track temperature variations.
The ADMV4530 upconverter comes in a RoHs compliant, 6 mm × 6 mm, 40-terminal land grid array (LGA) package. The ADMV4530 operates over the −40°C to +85°C case temperature range.
Applications
- Satellite communication
- Point to point microwave communication
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
