Datasheet for ADXL363BCCZ-RL:
- Manufacturer Part Number : ADXL363BCCZ-RL
- Manufacturer : AD
- Description : Micropower 3-Sensor Combination Including Acceleration and Temperature IC
- Series : ADXL363
- Reference Price : USD 0
- Our Price : We have a better price, contact us by email
- Product Type : Accelerometers
- Function : -
- Current Suggest : Recommended for New Designs
- Status : Production
- ROHS Status : ROHS Compliant (Lead Free)
- Package Type : 16-Lead LGA (3mm x 3.25mm)
- Pins : 16
- MFG Package Case : CC-16-4
- Part Type : REEL
- Standard Packing Type : Reel
- Standard Packing Quantity : 5000
- Working Temperature : -40 to 85C
- Other Part Number : ADXL363BCCZ-RL
- Shipping methods : DHL FEDEX UPS TNT
- Delivery Time : Ship within 1 day.
- Manufacturer Production time : 6-8 weeks (Normally have stocks)
- Weight : 0.001KG
Contact us to check the best price and real time inventory quantity for ADXL363BCCZ-RL. If you need any more information about ADXL363BCCZ-RL, you can also send us by email. Our email is [email protected], we will reply you in 12 hours.
- Accelerometer, temperature sensor, and provision for third analog sensor input
- All sensors sampled synchronously
Up to 400 Hz ODR
Samples can be synchronized to external trigger - Ultralow power
1.95 μA at 100 Hz ODR, 2.0 V supply, all sensors on
270 nA at 6 Hz motion activated wake-up mode
10 nA standby current - 12-bit resolution for all sensors
Acceleration scale factor down to 1 mg/LSB
Temperature scale factor: 0.065°C/LSB (typical) - Built-in features for motion-based system level power savings
Adjustable threshold sleep/wake modes for motion activation
- Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off completely
- Deep embedded FIFO minimizes host processor load
Awake state output enables implementation of standalone, motion activated switch - Wide supply and I/O voltage ranges: 1.6 V to 3.5 V
Operates off 1.8 V to 3.3 V rails
Power can be derived from coin cell battery - SPI digital interface
- Small and thin 3 mm × 3.25 mm × 1.06 mm package
The ADXL363 is an ultralow power, three-sensor combination consisting of a 3-axis MEMS accelerometer, a temperature sensor, and an on-board analog-to-digital converter (ADC) input for synchronous conversion of an external signal. The entire system consumes less than 2 μA at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode.
The ADXL363 communicates via a serial port interface (SPI) and always provides 12-bit output resolution for all three sensors.
The ADXL363 temperature sensor operates with a scale factor of 0.065°C/LSB (typical). Acceleration and temperature data can be stored in a 512-sample multimode first in, first out (FIFO) buffer, allowing up to 13 sec of data to be stored.
In addition to the accelerometer and temperature sensor, the ADXL363 also provides access to an internal ADC for synchronous conversion of an additional analog input.
The ADXL363 operates on a wide 1.6 V to 3.5 V supply range, and can interface, if necessary, to a host operating on a separate, lower supply voltage. The ADXL363 is available in a 3 mm × 3.25 mm × 1.06 mm package.
Applications
- Home healthcare devices
- Wireless sensors
- Motion enabled metering devices
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
